鼻整形前后实例

Online Service

Consultation & Reservation

nosejdh@gmail.com

COUNSEL
DIRECTION
TREATMENT HOUR

WEEKDAY

AM 09:00 ~ PM 07:00

※ Closed on Wed,Sat and
Public Holidays

 

 

 

鼻整形常识 HOME - 鼻整形前后实例

인쇄하기

Print List
Rhinoplasty material - gore-tex 1

페이지 정보

Poster.nose

Date.2001-05-18 00:00:00

Hit.121

Reply.0

본문

Gore-tex is an expensive material that was originally used as an artificial substance replacement in case of damaged pulmonary valves or major arteries for more than 30 years.

It was not made for rhinoplasty but it is widely used for cosmetic sugeries today.

It is also used for depressed parts of the body.

As displayed in the picture below there are two shapes that are being used. The right one is the  original soft skin-like material and the left one is one that is shaped already like a nose.

The writer uses the soft one on the right. It is 2mm thick and costs about US$45 per sheet.

The reason why the writer uses the original one on the right is because it is good from the patient's position. It is soft so it would not get noticed by others when inserted in the nose and its shape and height could also be controlled according to the patient's nose shape.

Because people are calling it "gore-tex" the manufacturers are putting them on market after carving it like the one on the left. This is 2mm sheets pasted with adhesives so it is hard.

However if it is hard then it is easier for surgeons to handle and it does not make much difference from the silicone if it is hard.

The manufacturers also carved it like a silicone so there is a differece more or less to a human nose.

If it is hard then obviously there is a risk of extrusion. Also like silicone if one holds the gore-tex from the nasal tip and shakes it to the left and right then the gore will move between the glabella. The highest one is 4.1mm but in my case there was one patient out of 4 that I operated yesterday who augmented 8mm.

So to speak everyone's nose varies in height and shape so there is a problem using one-sized material.

(DM)

고어텍스는 원래 심장판막 수술이나 큰 혈관의 손상시 이를 대체하는 인공물질로 이미 30년이상 사용되어온 고가의 재료입니다.

코성형을 위한 물질은 아니였으나 현재는 미용성형에도 광범위하게 사용되고 있습니다. 

몸의 어떤 부위가 함몰되었다던가 할 때에도 사용이 가능합니다.

그림에서와 같이 두가지 형태가 쓰이는데 우측은 코모양으로 깍아나온 것이고 좌측은 부드러운 가죽의 형태로 원래 제품 모양입니다.

필자는 우측의 부드러운 재료를 사용합니다.
이것은 2mm 두께로 한장에 약 50만원 정도입니다.

필자가 우측의 부드러운 원재료를 사용하는 이유는 환자의 입장에서 좋기 때문입니다. 환자의 코모양에 따라 높이와 모양의 조정이 가능하며 부드러워서 코안에 들어가면 남들이 전혀 알지 못합니다.

고어텍스 고어텍스하니까 업자들이 좌측과 같이 실리콘 모양으로 깍아서 판매하고 있습니다. 이것은 2mm짜리를 몇장 접착제를 이용하여 붙인 것으로 딱딱합니다.

그러나 딱딱한 것은 의사가 handling하기 쉬운 것이며 딱딱하다면 그것은 결국 실리콘과 크게 다를바가 없습니다.

모양도 업자가 실리콘 모양으로 깍은 것으로 인체의 코모양과는 다소 차이가 있습니다. 

딱딱하면 역시 탈출의 위험이 상존하고 실리콘처럼 코끝에서 고어텍스를 쥐고 좌우로 흔들면 미간사이에서 고어텍스가 왔다갔다 합니다. 그리고 높이도 최고 4.1mm 짜리가 나오는데 저는 어제 수술한 4명의 환자 가운데 8mm를 올린 분도 있었습니다.

즉 사람마다 코의 형태가 다르고 높이도 다양한데 찍어나온 것을 사용하는 것은 다소의 문제가 있습니다.
 

인쇄하기

Print List